Questions? Call Us: 1-800-426-5852

Arnold Magnetic Technologies

    Use this page to add multiple items to your cart all at one time.

    For each style, you can enter a quantity by color/size that you want to add to your Shopping Cart and then click on the Add to Cart button at the bottom of the page.

    Alnico Round Bar Guitar Magnet, .189" x .670" Chamfered
    SKU:65A3045 2
    Alnico 5, the most widely used grade, can usually be depended upon to deliver energy to a magnetic circuit more economically than any of the other Alnico grades. Magnetic saturation at the end-use location requires the application of a magnetizing force 4 to 5 times greater than the coercive force of the material. For Alnico 5, 3000 oersteds(240 KA/M) are recommended. Coating/plating is not normally applied because material is inherent corrosion resistant. Alnico also boasts the lowest temperature coefficient of any commercial magnet material (0.02% per degree centigrade) allowing for excellent stability over a wide temperature range. Alnico 4 and 5 - Guitar Magnets are now available in the grades and sizes listed below. Orders will be accepted in lots of 48 pieces. Available for shipments within the USA only at this time. If you require amounts larger than shown or you reside outside of the United States, please contact us at infona@arnoldmagnetics.com.
    Price: $1.48
    Alnico Round Bar Guitar Magnet, .189" x .700" Chamfered
    SKU:65A3046 2
    Alnico 5, the most widely used grade, can usually be depended upon to deliver energy to a magnetic circuit more economically than any of the other Alnico grades. Magnetic saturation at the end-use location requires the application of a magnetizing force 4 to 5 times greater than the coercive force of the material. For Alnico 5, 3000 oersteds(240 KA/M) are recommended. Coating/plating is not normally applied because material is inherent corrosion resistant. Alnico also boasts the lowest temperature coefficient of any commercial magnet material (0.02% per degree centigrade) allowing for excellent stability over a wide temperature range. Alnico 4 and 5 - Guitar Magnets are now available in the grades and sizes listed below. Orders will be accepted in lots of 48 pieces. Available for shipments within the USA only at this time. If you require amounts larger than shown or you reside outside of the United States, please contact us at infona@arnoldmagnetics.com.
    Price: $1.48
    Alnico Round Bar Guitar Magnet, .189" x .750"
    SKU:65A2646 2
    Alnico 5, the most widely used grade, can usually be depended upon to deliver energy to a magnetic circuit more economically than any of the other Alnico grades. Magnetic saturation at the end-use location requires the application of a magnetizing force 4 to 5 times greater than the coercive force of the material. For Alnico 5, 3000 oersteds(240 KA/M) are recommended. Coating/plating is not normally applied because material is inherent corrosion resistant. Alnico also boasts the lowest temperature coefficient of any commercial magnet material (0.02% per degree centigrade) allowing for excellent stability over a wide temperature range. Alnico 4 and 5 - Guitar Magnets are now available in the grades and sizes listed below. Orders will be accepted in lots of 48 pieces. Available for shipments within the USA only at this time. If you require amounts larger than shown or you reside outside of the United States, please contact us at infona@arnoldmagnetics.com.
    Price: $1.06
    Alnico Round Bar Guitar Magnet, .192" x  0.640"
    SKU:65A2787 2
    Alnico 5, the most widely used grade, can usually be depended upon to deliver energy to a magnetic circuit more economically than any of the other Alnico grades. Magnetic saturation at the end-use location requires the application of a magnetizing force 4 to 5 times greater than the coercive force of the material. For Alnico 5, 3000 oersteds(240 KA/M) are recommended. Coating/plating is not normally applied because material is inherent corrosion resistant. Alnico also boasts the lowest temperature coefficient of any commercial magnet material (0.02% per degree centigrade) allowing for excellent stability over a wide temperature range. Alnico 4 and 5 - Guitar Magnets are now available in the grades and sizes listed below. Orders will be accepted in lots of 48 pieces. Available for shipments within the USA only at this time. If you require amounts larger than shown or you reside outside of the United States, please contact us at infona@arnoldmagnetics.com.
    Price: $2.60
    austriamicrosystems Magnet
    SKU:81X0564-2
    Arnold Magnetic Technologies Part #81X0564-2 magnet also known as AS5000-M06H-1 or -3 for use with the austriamicrosystems AS50xx encoder. Pricing is per magnet, minimum order is 25 magnets and is sold in lots of 25 for the quantities of 25, 50 or 75 and then in lots of 100 for larger quantities. For quantities over 1,000 please contact us. Available for shipments within the USA only at this time.
    Price: $2.00
    Ceramic 8- Blocks, 6.00" x 4.00" x 0.250"(S)
    SKU:45231G
    Ceramic or also known as hard ferrite material are made from raw materials of strontium carbonate and iron oxide. They are nonstrategic, readily available and low in cost. As a result, the use of ceramic magnets in most applications is more economical than other materials. Irreversible changes can result from very low temperatures, and the magnetic qualitities can be restored only by re-magnetization. Irreversible changes can be avoided by providing adequate magnetic length, that is permeance coefficieint.
    Price: $6.13
    Ceramic 8- Blocks, 6.00" x 4.00" x 0.375"(S)
    SKU:45232G
    Ceramic or also known as hard ferrite material are made from raw materials of strontium carbonate and iron oxide. They are nonstrategic, readily available and low in cost. As a result, the use of ceramic magnets in most applications is more economical than other materials. Irreversible changes can result from very low temperatures, and the magnetic qualitities can be restored only by re-magnetization. Irreversible changes can be avoided by providing adequate magnetic length, that is permeance coefficieint.
    Price: $6.30
    Ceramic 8- Blocks, 6.00" x 4.00" x 0.500"(S)
    SKU:45233G
    Ceramic or also known as hard ferrite material are made from raw materials of strontium carbonate and iron oxide. They are nonstrategic, readily available and low in cost. As a result, the use of ceramic magnets in most applications is more economical than other materials. Irreversible changes can result from very low temperatures, and the magnetic qualitities can be restored only by re-magnetization. Irreversible changes can be avoided by providing adequate magnetic length, that is permeance coefficieint.
    Price: $9.18
    Ceramic 8- Blocks, 6.00" x 4.00" x 0.750"(S)
    SKU:45373G
    Ceramic or also known as hard ferrite material are made from raw materials of strontium carbonate and iron oxide. They are nonstrategic, readily available and low in cost. As a result, the use of ceramic magnets in most applications is more economical than other materials. Irreversible changes can result from very low temperatures, and the magnetic qualitities can be restored only by re-magnetization. Irreversible changes can be avoided by providing adequate magnetic length, that is permeance coefficieint.
    Price: $8.95
    Ceramic 8- Blocks, 6.00" x 4.00" x 1.00"(S)
    SKU:45234G
    Ceramic or also known as hard ferrite material are made from raw materials of strontium carbonate and iron oxide. They are nonstrategic, readily available and low in cost. As a result, the use of ceramic magnets in most applications is more economical than other materials. Irreversible changes can result from very low temperatures, and the magnetic qualitities can be restored only by re-magnetization. Irreversible changes can be avoided by providing adequate magnetic length, that is permeance coefficieint.
    Price: $8.83
    Ceramic 8- Rod, 2.90 X .600"(S)
    SKU:45699G
    Ceramic or also known as hard ferrite material are made from raw materials of strontium carbonate and iron oxide. They are nonstrategic, readily available and low in cost. As a result, the use of ceramic magnets in most applications is more economical than other materials. Irreversible changes can result from very low temperatures, and the magnetic qualitities can be restored only by re-magnetization. Irreversible changes can be avoided by providing adequate magnetic length, that is permeance coefficieint.
    Price: $1.58
    Hand Held Magnetizer
    SKU:AF-564-16-1.5MW
    Hand held magnetizer for use with any size sheet up to 30 mils thick.
    Price: $350.00
    Industrial Desktop Magnetizer
    SKU:AF-573-16-19MW
    19” Industrial motorized desktop magnetizer for up to 19” wide by .060” thick.
    Price: $4,000.00
    Magnetic Green Viewing Paper, Laminated, 3"x 3"
    SKU:GP100-7
    Magnetic Green Viewing Paper is used to show magnetic fields.
    Price: $3.10
    Magnetic Green Viewing Paper, Laminated, 3"x 4"
    SKU:GP100-6
    Magnetic Green Viewing Paper is used to show magnetic fields.
    Price: $4.35
    Magnetic Green Viewing Paper, Laminated, 4"x 6"
    SKU:GP100-5
    Magnetic Green Viewing Paper is used to show magnetic fields.
    Price: $7.75
    Magnetic Green Viewing Paper, Laminated, 6"x 12"
    SKU:GP100-3
    Magnetic Green Viewing Paper is used to show magnetic fields.
    Price: $18.77
    Magnetic Green Viewing Paper, Laminated, 6"x 6"
    SKU:GP100-4
    Magnetic Green Viewing Paper is used to show magnetic fields.
    Price: $9.70
    Magnetic Green Viewing Paper, Not Laminated, 12"x 12"
    SKU:GP101-2
    Magnetic Green Viewing Paper is used to show magnetic fields.
    Price: $30.00
    Magnetic Green Viewing Paper, Not Laminated, 4"x 6"
    SKU:GP101-5
    Magnetic Green Viewing Paper is used to show magnetic fields.
    Price: $7.60
    Loading...