Questions? Call Us: 1-800-426-5852

Arnold Magnetic Technologies

    Use this page to add multiple items to your cart all at one time.

    For each style, you can enter a quantity by color/size that you want to add to your Shopping Cart and then click on the Add to Cart button at the bottom of the page.

    Electronic Magnetic Pole Tester
    SKU:PT-100
    The electronic magnetic pole tester with audible beep comes in handy whenever you need to detect stray magnetic fields on packaging, perform magnetic polarity checks, test coils, or assemble electric motors. It provides an instant zero-delay magnetic pole indication and is also readable in the dark and where access is difficult.
    Price: $16.15
    Alnico 5 - Rectangular Bar, Cast, 0.250" X 0.500" X 6.00"(S)
    SKU:17156G
    Alnico 5, the most widely used grade, can usually be depended upon to deliver energy to a magnetic circuit more economically than any of the other Alnico grades. Magnetic saturation at the end-use location requires the application of a magnetizing force 4 to 5 times greater than the coercive force of the material. For Alnico 5, 3000 oersteds(240 KA/M) are recommended. Coating/plating is not normally applied because material is inherent corrosion resistant. Alnico also boasts the lowest temperature coefficient of any commercial magnet material (0.02% per degree centigrade) allowing for excellent stability over a wide temperature range. Alnico 4 and 5 - Guitar Magnets are now available in the grades and sizes listed below. Orders will be accepted in lots of 48 pieces. Available for shipments within the USA only at this time. If you require amounts larger than shown or you reside outside of the United States, please contact us at infona@arnoldmagnetics.com.
    Price: $15.27
    4" 5" 6"
    Alnico 5 - Rectangular Bar, Cast, 2.250" X 0.250" X 5.00"(S)
    SKU:31724G
    Alnico 5, the most widely used grade, can usually be depended upon to deliver energy to a magnetic circuit more economically than any of the other Alnico grades. Magnetic saturation at the end-use location requires the application of a magnetizing force 4 to 5 times greater than the coercive force of the material. For Alnico 5, 3000 oersteds(240 KA/M) are recommended. Coating/plating is not normally applied because material is inherent corrosion resistant. Alnico also boasts the lowest temperature coefficient of any commercial magnet material (0.02% per degree centigrade) allowing for excellent stability over a wide temperature range. Alnico 4 and 5 - Guitar Magnets are now available in the grades and sizes listed below. Orders will be accepted in lots of 48 pieces. Available for shipments within the USA only at this time. If you require amounts larger than shown or you reside outside of the United States, please contact us at infona@arnoldmagnetics.com.
    Price: $4.87
    Alnico 5 - Rectangular Bar, Cast, 2.500" X 0.125" X 5.00"(S)
    SKU:30127G
    Alnico 5, the most widely used grade, can usually be depended upon to deliver energy to a magnetic circuit more economically than any of the other Alnico grades. Magnetic saturation at the end-use location requires the application of a magnetizing force 4 to 5 times greater than the coercive force of the material. For Alnico 5, 3000 oersteds(240 KA/M) are recommended. Coating/plating is not normally applied because material is inherent corrosion resistant. Alnico also boasts the lowest temperature coefficient of any commercial magnet material (0.02% per degree centigrade) allowing for excellent stability over a wide temperature range. Alnico 4 and 5 - Guitar Magnets are now available in the grades and sizes listed below. Orders will be accepted in lots of 48 pieces. Available for shipments within the USA only at this time. If you require amounts larger than shown or you reside outside of the United States, please contact us at infona@arnoldmagnetics.com.
    Price: $7.19
    Alnico 5 - Round Bar, Cast, 0.125" X 4.00"(S)
    SKU:17141G
    Alnico 5, the most widely used grade, can usually be depended upon to deliver energy to a magnetic circuit more economically than any of the other Alnico grades. Magnetic saturation at the end-use location requires the application of a magnetizing force 4 to 5 times greater than the coercive force of the material. For Alnico 5, 3000 oersteds(240 KA/M) are recommended. Coating/plating is not normally applied because material is inherent corrosion resistant. Alnico also boasts the lowest temperature coefficient of any commercial magnet material (0.02% per degree centigrade) allowing for excellent stability over a wide temperature range. Alnico 4 and 5 - Guitar Magnets are now available in the grades and sizes listed below. Orders will be accepted in lots of 48 pieces. Available for shipments within the USA only at this time. If you require amounts larger than shown or you reside outside of the United States, please contact us at infona@arnoldmagnetics.com.
    Price: $2.47
    Alnico 5 - Round Bar, Cast, 0.188" X 5.00"(S)
    SKU:17142G
    Alnico 5, the most widely used grade, can usually be depended upon to deliver energy to a magnetic circuit more economically than any of the other Alnico grades. Magnetic saturation at the end-use location requires the application of a magnetizing force 4 to 5 times greater than the coercive force of the material. For Alnico 5, 3000 oersteds(240 KA/M) are recommended. Coating/plating is not normally applied because material is inherent corrosion resistant. Alnico also boasts the lowest temperature coefficient of any commercial magnet material (0.02% per degree centigrade) allowing for excellent stability over a wide temperature range. Alnico 4 and 5 - Guitar Magnets are now available in the grades and sizes listed below. Orders will be accepted in lots of 48 pieces. Available for shipments within the USA only at this time. If you require amounts larger than shown or you reside outside of the United States, please contact us at infona@arnoldmagnetics.com.
    Price: $3.71
    Alnico 5 - Round Bar, Cast, 0.188" X 6.50"(S)
    SKU:29561G
    Alnico 5, the most widely used grade, can usually be depended upon to deliver energy to a magnetic circuit more economically than any of the other Alnico grades. Magnetic saturation at the end-use location requires the application of a magnetizing force 4 to 5 times greater than the coercive force of the material. For Alnico 5, 3000 oersteds(240 KA/M) are recommended. Coating/plating is not normally applied because material is inherent corrosion resistant. Alnico also boasts the lowest temperature coefficient of any commercial magnet material (0.02% per degree centigrade) allowing for excellent stability over a wide temperature range. Alnico 4 and 5 - Guitar Magnets are now available in the grades and sizes listed below. Orders will be accepted in lots of 48 pieces. Available for shipments within the USA only at this time. If you require amounts larger than shown or you reside outside of the United States, please contact us at infona@arnoldmagnetics.com.
    Price: $1.69
    Alnico 5 - Round Bar, Cast, 0.213" X 6.50"(S)
    SKU:26923G
    Alnico 5, the most widely used grade, can usually be depended upon to deliver energy to a magnetic circuit more economically than any of the other Alnico grades. Magnetic saturation at the end-use location requires the application of a magnetizing force 4 to 5 times greater than the coercive force of the material. For Alnico 5, 3000 oersteds(240 KA/M) are recommended. Coating/plating is not normally applied because material is inherent corrosion resistant. Alnico also boasts the lowest temperature coefficient of any commercial magnet material (0.02% per degree centigrade) allowing for excellent stability over a wide temperature range. Alnico 4 and 5 - Guitar Magnets are now available in the grades and sizes listed below. Orders will be accepted in lots of 48 pieces. Available for shipments within the USA only at this time. If you require amounts larger than shown or you reside outside of the United States, please contact us at infona@arnoldmagnetics.com.
    Price: $1.03
    Alnico 5 - Round Bar, Cast, 0.250" X 6.50"(S)
    SKU:29186G
    Alnico 5, the most widely used grade, can usually be depended upon to deliver energy to a magnetic circuit more economically than any of the other Alnico grades. Magnetic saturation at the end-use location requires the application of a magnetizing force 4 to 5 times greater than the coercive force of the material. For Alnico 5, 3000 oersteds(240 KA/M) are recommended. Coating/plating is not normally applied because material is inherent corrosion resistant. Alnico also boasts the lowest temperature coefficient of any commercial magnet material (0.02% per degree centigrade) allowing for excellent stability over a wide temperature range. Alnico 4 and 5 - Guitar Magnets are now available in the grades and sizes listed below. Orders will be accepted in lots of 48 pieces. Available for shipments within the USA only at this time. If you require amounts larger than shown or you reside outside of the United States, please contact us at infona@arnoldmagnetics.com.
    Price: $2.74
    Alnico 5 - Round Bar, Cast, 0.689" X 8.00"(S)
    SKU:17148G
    Alnico 5, the most widely used grade, can usually be depended upon to deliver energy to a magnetic circuit more economically than any of the other Alnico grades. Magnetic saturation at the end-use location requires the application of a magnetizing force 4 to 5 times greater than the coercive force of the material. For Alnico 5, 3000 oersteds(240 KA/M) are recommended. Coating/plating is not normally applied because material is inherent corrosion resistant. Alnico also boasts the lowest temperature coefficient of any commercial magnet material (0.02% per degree centigrade) allowing for excellent stability over a wide temperature range. Alnico 4 and 5 - Guitar Magnets are now available in the grades and sizes listed below. Orders will be accepted in lots of 48 pieces. Available for shipments within the USA only at this time. If you require amounts larger than shown or you reside outside of the United States, please contact us at infona@arnoldmagnetics.com.
    Price: $53.97
    Alnico 5 - Round Bar, Cast, 0.840" X 8.00"(S)
    SKU:17150G
    Alnico 5, the most widely used grade, can usually be depended upon to deliver energy to a magnetic circuit more economically than any of the other Alnico grades. Magnetic saturation at the end-use location requires the application of a magnetizing force 4 to 5 times greater than the coercive force of the material. For Alnico 5, 3000 oersteds(240 KA/M) are recommended. Coating/plating is not normally applied because material is inherent corrosion resistant. Alnico also boasts the lowest temperature coefficient of any commercial magnet material (0.02% per degree centigrade) allowing for excellent stability over a wide temperature range. Alnico 4 and 5 - Guitar Magnets are now available in the grades and sizes listed below. Orders will be accepted in lots of 48 pieces. Available for shipments within the USA only at this time. If you require amounts larger than shown or you reside outside of the United States, please contact us at infona@arnoldmagnetics.com.
    Price: $75.35
    Alnico 8 - Rectangular Bar, Cast, 0.250" X 0.250" X 4.00"(S)
    SKU:16792G
    Alnico 8 possesses the highest coercive force of all Alnico grades, as well as excellent energy per unit volume and a low temperature coefficient. It is recommended for applications exposed to strong demagnetizing fields, or where space considerations dictate a short magnetic length. Coating/plating is not normally applied because material is inherent corrosion resistant. Alnico also boasts the lowest temperature coefficient of any commercial magnet material (0.02% per degree centigrade) allowing for excellent stability over a wide temperature range. Alnico 8 grades are now available in rod and bar form as well as cast and ground. Please choose from the dimensions below. Available for shipments within the USA only at this time. If you require amounts larger than shown or you reside outside of the United States, please contact us at infona@arnoldmagnetics.com.
    Price: $11.48
    Alnico 8 - Round Bar, Cast, 0.125" X .400"(S)
    SKU:167896G
    Alnico 8 possesses the highest coercive force of all Alnico grades, as well as excellent energy per unit volume and a low temperature coefficient. It is recommended for applications exposed to strong demagnetizing fields, or where space considerations dictate a short magnetic length. Coating/plating is not normally applied because material is inherent corrosion resistant. Alnico also boasts the lowest temperature coefficient of any commercial magnet material (0.02% per degree centigrade) allowing for excellent stability over a wide temperature range. Alnico 8 grades are now available in rod and bar form as well as cast and ground. Please choose from the dimensions below. Available for shipments within the USA only at this time. If you require amounts larger than shown or you reside outside of the United States, please contact us at infona@arnoldmagnetics.com.
    Price: $9.25
    Alnico 8 - Round Bar, Cast, 0.375" X 4.00"(S)
    SKU:16787G
    Alnico 8 possesses the highest coercive force of all Alnico grades, as well as excellent energy per unit volume and a low temperature coefficient. It is recommended for applications exposed to strong demagnetizing fields, or where space considerations dictate a short magnetic length. Coating/plating is not normally applied because material is inherent corrosion resistant. Alnico also boasts the lowest temperature coefficient of any commercial magnet material (0.02% per degree centigrade) allowing for excellent stability over a wide temperature range. Alnico 8 grades are now available in rod and bar form as well as cast and ground. Please choose from the dimensions below. Available for shipments within the USA only at this time. If you require amounts larger than shown or you reside outside of the United States, please contact us at infona@arnoldmagnetics.com.
    Price: $25.29
    Alnico 8 - Round Bar, Cast, 0.625" X 4.00"(S)
    SKU:167896G
    Alnico 8 possesses the highest coercive force of all Alnico grades, as well as excellent energy per unit volume and a low temperature coefficient. It is recommended for applications exposed to strong demagnetizing fields, or where space considerations dictate a short magnetic length. Coating/plating is not normally applied because material is inherent corrosion resistant. Alnico also boasts the lowest temperature coefficient of any commercial magnet material (0.02% per degree centigrade) allowing for excellent stability over a wide temperature range. Alnico 8 grades are now available in rod and bar form as well as cast and ground. Please choose from the dimensions below. Available for shipments within the USA only at this time. If you require amounts larger than shown or you reside outside of the United States, please contact us at infona@arnoldmagnetics.com.
    Price: $58.05
    Alnico 8 - Round Bar, Cast, 1" DIA x 4" LG (M)
    SKU:68A0186 3
    Alnico 8 possesses the highest coercive force of all Alnico grades, as well as excellent energy per unit volume and a low temperature coefficient. It is recommended for applications exposed to strong demagnetizing fields, or where space considerations dictate a short magnetic length. Coating/plating is not normally applied because material is inherent corrosion resistant. Alnico also boasts the lowest temperature coefficient of any commercial magnet material (0.02% per degree centigrade) allowing for excellent stability over a wide temperature range. Alnico 8 grades are now available in rod and bar form as well as cast and ground. Please choose from the dimensions below. Available for shipments within the USA only at this time. If you require amounts larger than shown or you reside outside of the United States, please contact us at infona@arnoldmagnetics.com.
    Price: $86.38
    Alnico 8B - Rectangular Bar, Cast, .625"W x 4.00" LG (M) x .625" THK
    SKU:68A0322 2
    Alnico 8 possesses the highest coercive force of all Alnico grades, as well as excellent energy per unit volume and a low temperature coefficient. It is recommended for applications exposed to strong demagnetizing fields, or where space considerations dictate a short magnetic length. Coating/plating is not normally applied because material is inherent corrosion resistant. Alnico also boasts the lowest temperature coefficient of any commercial magnet material (0.02% per degree centigrade) allowing for excellent stability over a wide temperature range. Alnico 8 grades are now available in rod and bar form as well as cast and ground. Please choose from the dimensions below. Available for shipments within the USA only at this time. If you require amounts larger than shown or you reside outside of the United States, please contact us at infona@arnoldmagnetics.com.
    Price: $47.85
    Alnico 8B - Round Bar, Cast, .125" DIA x 4.00" LG (M)
    SKU:68A0282 3
    Alnico 8 possesses the highest coercive force of all Alnico grades, as well as excellent energy per unit volume and a low temperature coefficient. It is recommended for applications exposed to strong demagnetizing fields, or where space considerations dictate a short magnetic length. Coating/plating is not normally applied because material is inherent corrosion resistant. Alnico also boasts the lowest temperature coefficient of any commercial magnet material (0.02% per degree centigrade) allowing for excellent stability over a wide temperature range. Alnico 8 grades are now available in rod and bar form as well as cast and ground. Please choose from the dimensions below. Available for shipments within the USA only at this time. If you require amounts larger than shown or you reside outside of the United States, please contact us at infona@arnoldmagnetics.com.
    Price: $8.99
    Alnico 8B - Round Bar, Cast, .250" DIA x 4.00" LG (M)
    SKU:68A0309 2
    Alnico 8 possesses the highest coercive force of all Alnico grades, as well as excellent energy per unit volume and a low temperature coefficient. It is recommended for applications exposed to strong demagnetizing fields, or where space considerations dictate a short magnetic length. Coating/plating is not normally applied because material is inherent corrosion resistant. Alnico also boasts the lowest temperature coefficient of any commercial magnet material (0.02% per degree centigrade) allowing for excellent stability over a wide temperature range. Alnico 8 grades are now available in rod and bar form as well as cast and ground. Please choose from the dimensions below. Available for shipments within the USA only at this time. If you require amounts larger than shown or you reside outside of the United States, please contact us at infona@arnoldmagnetics.com.
    Price: $14.74
    Alnico 8B - Round Bar, Cast, .250" DIA x 4.00" LG (M) x .250 THK
    SKU:68A0313 2
    Alnico 8 possesses the highest coercive force of all Alnico grades, as well as excellent energy per unit volume and a low temperature coefficient. It is recommended for applications exposed to strong demagnetizing fields, or where space considerations dictate a short magnetic length. Coating/plating is not normally applied because material is inherent corrosion resistant. Alnico also boasts the lowest temperature coefficient of any commercial magnet material (0.02% per degree centigrade) allowing for excellent stability over a wide temperature range. Alnico 8 grades are now available in rod and bar form as well as cast and ground. Please choose from the dimensions below. Available for shipments within the USA only at this time. If you require amounts larger than shown or you reside outside of the United States, please contact us at infona@arnoldmagnetics.com.
    Price: $15.43
    Loading...